Electrolux EWF 10591 W, User Manual

Page: 13 / 40

use electrolux 13
Select the spin speed, Night Cycle
or Rinse Hold option by pressing
button 3
Press button
3
repeatedly to change
the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine. The relevant light will light up.
When selecting a programme, the
appliance proposes automatically the
maximum spin speed provided for that
programme.
Night Cycle: by selecting this option,
the machine will not drain the water of
the last rinse, so as not to wrinkle the
laundry. As all spinning phases are
suppressed, this washing cycle is very
noiseless and it can be selected at
night or in times with a more
economical power rate.
On cotton and synthetic programmes
the rinses will be performed with more
water.
When the programme has finished the
display shows three blinking
0.00 ,
the
pilot light
9
is on, the pilot light of the
button
8
is off and the door is locked
to indicate that the water must be
emptied out.
Rinse Hold: by selecting this option
the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows
0.00
flashing, the pilot light
9
is on, the pilot
light of the button
8
is off and the door
is locked to indicate that the water
must be emptied out.
To empty the water out please reed
the chapter «At the end of the
programme»
.
Select the Easy Iron option by
pressing button
4
Selecting this option the laundry is
gently washed and spun to avoid any
creasing. In this way ironing is easier.
Furthermore the machine will perform
some additional rinses. If this option is
selected for cotton programmes, the
spin speed automaticaly will reduce to
900 rpm. The relevant light will
illuminate.
Select the Extra Rinse option by
pressing button
5
The machine performs some additional
rinses. This option is recommended for
people who are allergic to detergents,
and in areas where the water is very
soft. The relevant light will illuminate.
Select the Delay Start by pressing
button
6
Before you start the programme, if you
wish to delay the start, press button
6
repeatedly, to select the desired delay.
The relevant light will illuminate.
The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.
You must select this option after you
have set the programme and before you
press button
8
.
If you wish to add laundry in the
machine during the delay time you will
press button
8
to put the machine in
pause. Add the laundry, close the door
and press button
8
again.
You can cancel or modify the delay time
at any moment, before you press
button
8
.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
132961221 EN.qxd 24/03/2009 16.15 Pagina 13