52
CARE AND CLEANING
Removing and Replacing the Oven Door
Figure 12: Door hinge location
To remove the oven door:
1. Open oven door completely, horizontal with fl oor
(Figure 11).
2. Pull up the lock located on each hinge support to-
ward front of the oven until the lock stops. You may
have to apply a little upward pressure on the lock
to pull it up (Figure 12 and Figure 13).
3. Grasp the door by the sides, and close the door
until the door frame makes contact with the un-
locked hinges.
4. Pull the bottom of the door toward you while ro-
tating the top of the door toward the appliance to
completely disengage the hinge levers (Figure 14).
Oven door
hinge
locations
Figure 13: Door hinge locked
Figure 14: Unlocking door hinge
Figure 15: Remove door position
Door frame flush
with hinge lock
Hinge
notch
To replace the oven door:
1.
Firmly grasp both sides of oven door along the
door sides. Do not use the oven door handle
(Figure 14).
2. Hold the oven door at the same angle as the
removal position. Carefully insert the hinge levers
into the oven frame until you feel the hinge levers
are seated into the hinge notches. The hinge arms
must be fully seated into the hinge notches before
the oven door can be fully opened. (Figure 14).
3. Fully open the oven door, horizontal with fl oor
(Figure 11).
4. Push the door hinge locks up toward and into the
oven frame on both left and right oven door hing-
es to the locked position (Figure 12).
5. Close
the
oven
door.
IMPORTANT
Special door care instructions - For safe,
temporary storage, lay the door fl at with the
inside of the door facing down.
Most oven doors contain glass that can break.
Do not hit the glass with pots, pans, or any other
object. Scratching, hitting, jarring, or stressing
the glass may weaken its structure, causing an
increased risk of breakage at a later time. Do not
close the oven door until all of the oven racks are
fully in place.
CAUTION
The door is heavy. For safe, temporary storage,
lay the door fl at with the inside of the door facing
down.
