36
Figure 1
For many foods, especially roasts and poultry, testing the internal temperature is the best
method to insure properly cooked food. The Temperature Probe gets the exact temperature
you desire without having to guess. This feature can be used with Bake, Convection Bake,
Convection Roast and Perfect Turkey cooking modes. The oven can be programmed for
Probe at any temperature between 130°F to 210°F with a default temperature of 170°F. This
unit is equipped with one temperature probe entry in the upper oven.
IMPORTANT:
1. Use only the probe supplied with your appliance; any other may result in damage to the
probe or the appliance.
2. Handle the Temperature Probe carefully when inserting and removing it from the food and outlet.
3. Do not use tongs to pull the cable when inserting or removing the Probe. It could damage the Probe.
4. Defrost your food completely before inserting the Probe to avoid breaking it.
5. Never leave or store the Temperature Probe inside the oven when not in use.
6. To prevent the possibility of burns, carefully unplug the Temperature Probe using hot
pads.
Proper Temperature Probe Placement:
1. Always insert the probe so that the tip rests in the center of
the thickest part of the meat. Do not allow probe to touch
bone, fat, gristle or pan.
2. For bone-in ham or lamb, insert the Probe into the center of
the lowest large muscle or joint. For dishes such as meat loaf or
casseroles, insert the Probe into the center of the food. When cooking fi sh,
insert the Probe from just above the gill into the meatiest area, parallel to the backbone.
3. For whole poultry (chicken, turkey, etc.), insert the probe into the thickest part of the inner
thigh from below and parallel to the leg (see fi gure 1).
Setting the Oven when using the Temperature Probe:
1. Insert the Temperature Probe into the food (see Proper Temperature Probe Placement above).
2. Plug the Temperature Probe into its outlet in the oven. (
The outlet is located on the top
left hand side of the cavity wall, near front of the oven
). Always insert the probe into
a cool oven. Make sure it is pushed all the way into the outlet. Close the oven door.
3. Select oven by pressing either
UPPER OVEN
UPPER
OVEN
.
4. Select a cooking mode. A target temperature must be set to trigger the buzzer when the food
reaches the set temperature. Press
COOK OPTIONS
to bring up the cook options items
and press
PROBE
pad to enter the temperature. Adjust temperature to the desired setting
using the numeric pads or just press
START
to use the default target temperature of
170°F. The pads
+
hi
or
-
lo
can also be pressed to raise or lower the temperature. The target
temperature setting will be accepted after the
START
pad is pressed.
5. At any time during the cooking, the
PROBE
pad can be pressed once to display the
actual meat temperature or pressed twice to display the target temperature. When on
the target temperature display, a new temperature can be entered. After 5-8 seconds,
the display will go back to showing the oven temperature.
6. When the food reach the target temperature, the oven will go into a
KEEP WARM
mode
until you press
CANCEL
.
The probe can be damaged by very high temperature. To protect the probe against this
damage, the oven control will not allow you to start a self-clean, broil or convection broil
while the probe is connected.
TEMPERATURE PROBE
Cooking Modes
Summary of Contents for EW30IS6CJS
Page 1: ...318 205 809 1012 Rev B Use Care Guide Electric Slide In Range ...
Page 58: ...58 Notes ...
Page 59: ...59 Notes ...
Page 60: ......
