15
Getting Started
SETTING CLOCK AT POWER UP
When the unit is fi rst plugged in, or when the power supply to the range has been interrupted,
the timer in the display will fl ash with
“12:00”
. The clock cannot be set when the oven is
on. If an invalid time of day is entered, the control will triple beep to prompt you to re-enter
a valid time of day.
To set the clock (example for 1:30):
1. Press
1 3 0
pads to set the time of day to 1:30. The pads
+
hi
or
-
lo
can also be pressed
to raise or lower the actual time displayed.
2. Press
START
to accept the changes or
CANCEL
to start with a time of 12:00.
CONTROL PANEL DISPLAY MODES
Sleep Mode:
Your control will remain in a sleep mode when not in use. Only the clock will display during
this mode. You will need to wake the control to begin any function.
Wake Mode:
To wake the control, touch within the display panel. After 2 minutes without activity the control
will beep and go back into sleep mode.
To start a cooking feature you must select either the upper oven or the lower oven. User
preferences will be available during this mode as well as timers, oven light and the control
lock.
TEMPERATURE VISUAL DISPLAY
Your oven is equipped with a temperature visual display for each oven. When a cooking mode
is set, the actual temperature will be shown in the display and will rise as the unit preheat.
When the unit has reached its target temperature, a chime will sound to remind you to place
the food in the oven. This feature will be active with some cooking modes; bake, convection
bake, convection roast and perfect turkey. The cooking modes which does not feature the
temperature visual display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed is 100°F.
Summary of Contents for EW30IS6CJS
Page 1: ...318 205 809 1012 Rev B Use Care Guide Electric Slide In Range ...
Page 58: ...58 Notes ...
Page 59: ...59 Notes ...
Page 60: ......