2
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with Sealed Top Burners)
1 1/8"
(2,86 cm)
FRONT
OF
CABINET
F
Ref.
22 7/8"
(58,1 cm) min.
23 1/4" (59,05 cm) max.
(see Note 4)
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
3. 24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the
bottom of wood or metal cabinet is
protected by not less than ¼" (0,64 cm)
flame retardant millboard covered with
not less than No. 28 MSG sheet metal,
0,015"(0,4 mm) stainless steel,
0,024"(0,6 mm) aluminum, or 0,020"
(0,5 mm) copper.
30" (76,2 cm) minimum clearance when
the cabinet is unprotected.
4. For cutouts below 22 7/8"(58,1 cm),
appliance will slightly show out of the
cabinet.
5. Allow at least 19 ¼" (48,9 cm) clearance
for door depth when it is open.
*IMPORTANT:
To avoid cooktop breakage for cutout width (E dimension) of more
than 30
1
/
16
" (76,4 cm), make sure the appliance is centered in the counter opening
while pushing into it. Raise leveling legs at maximum position, insert the appliance
in the counter and then level.
Make sure the unit is supported by the leveling
legs not by the cooktop itself.
IMPORTANT:
Cabinet and countertop
width should match the cutout width.
E
E
35 5/8" (90,5 cm) -
36 5/8" (93cm)
30" (76,2 cm)
28 5/16" (71,9 cm)
30±1/16"
(76,2±0,15 cm)
21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
35 3/4" (90,8 cm) Min.
A
. HEIGHT
B
.
WIDTH
D
.
DEPTH TO FRONT
OF RANGE
E
.
CUTOUT WIDTH ***
(Countertop and
Cabinet)
F
.
CUTOUT
DEPTH
G
.
HEIGHT
OF COUNTERTOP
31½" (80 cm)
C.
COOKTOP
WIDTH
A
D
C
B
Door Open
(see note 5)
Side panel
Figure 1
