
A
A
1.
Open the door fully.
2.
Fully press the clamping levers (A) on
the two door hinges.
3.
Close the oven door to the first open-
ing position (approximately 70° angle).
4.
Hold the door with one hand on each
side and pull it away from the appli-
ance at an up angle.
5.
Put the door with the outer side
down on a soft cloth on a stable sur-
face. This is to prevent scratches.
2
B
1
6.
Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
7.
Pull the door trim to the front to re-
move it.
8.
Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
9.
Clean the glass panel with water and
soap. Dry the glass panel carefully.
Installing the door and the glass
panels
When the cleaning is completed, install
the glass panels and the oven door. Do
the above steps in the opposite se-
quence. Install the smaller panel first, then
the larger.
13.
WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does
not heat up.
The appliance is deactiva-
ted.
Activate the appliance.
The appliance does
not heat up.
The clock is not set.
Set the clock.
The appliance does
not heat up.
The necessary settings are
not set.
Check the settings.
40 www.electrolux.com
Summary of Contents for EVY9841AA
Page 1: ...EVY9841AA EVY9841AO EN STEAM OVEN USER MANUAL ...
Page 44: ...90 44 www electrolux com ...
Page 46: ...46 www electrolux com ...
Page 47: ...ENGLISH 47 ...