background image

3

Instruction book

Before using the iron for the first time,  

please read the safety advice.

Safety advice

Before using the iron for the first time, 

read the following instruction carefully 

and save for future reference. The 

following advice will help you to use 

your new iron safely.

•   This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning the use of the appliance by 

a person responsible for their safety.

•  Children should be supervised to 

ensure that they do not play with the 

appliance. 

•  The appliance should only be 

connected to a power supply if its  

voltage and frequency comply with 

the specifications written on the rating 

plate.

•  The iron is not to be used if it has been 

dropped, if there are visible signs of 

damage to the plug, the main cord, to 

the iron itself or if it is leaking.

•  The appliance must only be connected 

to an earthed socket.

•  If the appliance or the supply cord 

is damaged, it must be replaced by 

the manufacturer, its service agent or 

similar qualified person, in order to 

avoid hazard.

•  The iron must be used and rested on a 

stable surface. When placing the iron 

on its rubber-napped heel, ensure that 

the surface on which the heel  is placed 

is stable.

•  Never leave the appliance unattended 

while connected to the supply mains.

•  The appliance must be switched off 

and the main plug withdrawn each 

time after use, before refilling, cleaning 

and maintenance.

•  The plug must be removed from the 

socket outlet before the water tank is 

filled with water.

•  The main cable must not come into 

contact with any hot parts of the 

appliance.

•  Do not immerse the appliance in water 

or any other liquid.

•  Do not exceed the maximum filling 

volume as indicated on the water tank.

•  The soleplate of the iron and nearby 

surfaces can become extremely hot 

and may cause burns if touched. Please 

be especially careful when handling 

the iron after use, or when re-filling the 

water tank during use.

•  This appliance is intended for domestic 

use only. The manufacturer cannot 

accept any liability for possible damage 

caused by improper or incorrect use.

Safety Features

1. 3-way auto safety shut off.

If the iron is left unattended, resting 

on the soleplate or on the side, it will 

automatically turn off after 30 seconds. 

If left unattended resting on the heel, it 

will turn off after 8 minutes. The auto-

safety shut off indicator light (K) will 

start flashing orange and a sound alert 

will beep 6 times to indicate that the 

iron has been switched off. If you wish 

to turn it back on again, move the iron 

gently until the temperature indicator 

light (J) turns red. It will turn green once 

the temperature selected is reached, 

meaning the iron is ready to use again.

2.  SafeTouch

TM

 hot soleplate safety 

indicator

The iron is equipped with a SafeTouch

TM

 

hot soleplate safety indicator (B) located 

at the front. The indicator stripe is black 

when the iron is cold. As soon as the 

soleplate reaches 40

o

C, the stripe turns 

red indicating that the soleplate is hot 

and should not be touched. Once the iron 

is unplugged, the stripe will slowly revert 

to black as the soleplate cools down. 

Wait for the stripe to revert to black again 

before touching the soleplate or storing 

the iron.

Safety 

Indicator

Summary of Contents for ESI 7 Series









Reviews: