16 www.electrolux.com
2.
Set the desired time by pressing
repeatedly or holding down the UP/
DOWN buttons until 09:30 shows in the
display of the remote control.
3.
Con
Û
rm the set time by pointing the
remote control to the indoor unit and
pressing again the Timer-Off button.
4.
Press the Timer-On button.
5.
Set the desired time by pressing
repeatedly or holding down the UP/
DOWN buttons until 18:00 shows in the
display of the remote control.
6.
Con
Û
rm the set time by pointing the
remote control to the indoor unit and
pressing again the Timer-On button.
q
” and
q
” symbol is displayed on
the remote control and the function is
activated.
TIMER ON
ė
TIMER OFF
(Off
ė
Start
ė
Stop operation)
This feature is useful when you want to
start the air conditioner before you wake
up and stop it after you leave the house.
Example:
It is 10:00 PM and you want to start the
air conditioner at 6:30 AM and stop it at
9:30 AM.
1.
Press the Timer-On button.
2.
Set the desired time by pressing
repeatedly or holding down the UP/
DOWN buttons until 06:30 shows in the
display of the remote control.
3.
Con
Û
rm the set time by pointing the
remote control to the indoor unit and
pressing again the Timer-On button.
4.
Press the Timer-Off button.
5.
Set the desired time by pressing
repeatedly or holding down the UP/
DOWN buttons until 18:00 shows in the
display of the remote control.
6.
Con
Û
rm the set time by pointing the
remote control to the indoor unit and
pressing again the Timer-Off button.
q
” and
q
” symbol is displayed
on the remote control and the function
is activated.
Setting the Clock
B
A
Before you start operating the air
conditioner, set the clock of the remote
control using the procedure given in this
section. The clock panel on the remote
control will display the time regardless of
whether the air conditioner is in operation
or not. After batteries are inserted in the
remote control,
will display and
begin to
Ü
ash.
1.
Press the UP/DOWN buttons to set the
desired time.
2.
When the desired time is achieved,
press the Clock button again or after 5
seconds with no operation, the clock
time stops
Ü
ashing and the clock is set.
3.
Press the Clock button and the clock
display will start to
Ü
ash. Follow step 1
and 2 to set the new time.
For models without Clock button,
to enabled Clock funtion you need
press Mode and Temp buttons at
the same time.
Summary of Contents for ERS09E37HW
