Electrolux ERC9025SD, User Manual

Page: 5 / 12

5
1. Using a spirit level mark a vertical centre line on
the wall where the rangehood is to be positioned, and
a horizontal line at the base position (refer Fig. A).
NOTE: The height of the underside of the rangehood
body must be a minimum of 600mm* to a maximum
height of 800mm.
* If the instructions of the hob specify a greater distance
than the minimum above, then that shall be the minimum
height for installation.
2. Mark the location for flue cover wall mounting
brackets, rangehood mounting points and anti-tilt
fixing points above the rangehood using the
base as the reference point (Fig. A).
3. Install fiue cover wall mounting brackets with suitable
fixings. Install suitable screws for rangehood mounting
points (to support a total weight of 30kg) to the wall as
marked (Fig. B).
4. Remove the protective plastic film from the rangehood
body and hang it on the mounting screws then secure
at the anti-tilt locations as indicated in Fig. C.
5. Fix air outlet using screws supplied (Fig.D).
RANGEHOOD INSTALLATION
Warning:
Failure to install the screws or fixing device
in accordance with these instructions may
result in electrical hazards.
m
in
. 6
00
m
m
m
ax
. 8
00
m
m
rangehood
mounting points
anti-tilt fix ing point
hood
base
top
of hob
250mm
580mm
flue cover
wall mounting
brackets
ceiling
250mm
23.5mm
m
ax
. 1
18
0m
m
55
9m
m
28
6m
m
36
m
m
Fig. A
GAS
ELECTRIC
m
in
. 6
50
m
m
m
ax
. 8
00
m
m
2mm
A
B
Fig. C.
See Fig. A for dimensions
Fig. B.
Fig. D