Electrolux ERC9025SD, User Manual

Page: 3 / 12

3
Electrical connection
Check that the mains voltage matches with the voltage
on the data plate inside the rangehood. Check that the
installation complies with standards of local building, gas
and electrical authorities. Before connecting to the mains
supply ensure that the mains voltage corresponds to the
voltage on the rating plate inside the rangehood.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or similarly qualified
person in order to avoid a hazard.
Safety warnings – for the installer
When installing the rangehood, make sure you
adhere to the minimum and maximum distances from
the rangehood base to the hob surface (as shown on
page 6).
Exhaust flue installation:
The following rules must be strictly followed to obtain
optimal air extraction.
• Keep exhaust flue short and straight.
•
Do not reduce the size or restrict exhaust
• Keep bends in the exhaust to a minimum.
• When using le always install duct with helix
pulled taut to minimise pressure loss.
• Failure to observe these basic instructions will
drastically reduce the performance and increase the
noise levels of the rangehood.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for that purpose.
The exhaust from the rangehood must not be discharged
into any heating flue, which may carry combustion
products from other sources.
NOTE: Some installations may require the telescopic
exhaust cover to be cut to length. Cut with sharp tin
snips or a fine-tooth hack saw blade, taking care not to
distort or dent the exhaust cover.
Fig. 1 Fig. 2
IMPORTANT SAFETY INSTRUCTIONS
This manual explains the proper use of your new Electrolux
rangehood. Please read this manual carefully before using
the product. This manual should be kept in a safe place for
handy reference.
This rangehood is a domestic appliance which has
been manufactured and tested to comply with Australian
and New Zealand Standard AS/NZS 60335.2.31.
CAUTION!
Meanings of symbols used in this manual are shown below:
This symbol indicates never to do this
This symbol indicates always do this
CAUTION!
Follow these instructions carefully to avoid an electric
shock or fire.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
Ensure the rangehood is switched off before carrying
out maintenance, to avoid any possibility of electric
shock.
Do not fambé under the rangehood.
This rangehood is not recommended for barbecues.
This rangehood cannot be installed for external use.
Grease filters must be removed every four weeks
(maximum) for cleaning to reduce the risk of fire.
Exhaust air must not be discharged into a wall cavity,
unless the cavity is designed for the purpose.
The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other
fuels.(Fig. 1)
Always cover lit gas burners with pots or pans when
rangehood is in use.
Always switch off gas burners before you remove pots
or pans.
Do not leave lit gas burners exposed due to the risk
of fire. (Fig. 2)
there is a fire risk if cleaning is not carried out in
accordance with the instructions.
CAUTION: Accessible parts may become hot when
used with cooking appliances.
In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as
a timer, or connected to a circuit that is regularly
switched on and off by the utility.
Means for electrical disconnection must be
incorporated in the fixed wiring in accordance with the
wiring rules. This may be achieved by having the plug
in an accessible location.