Electrolux EOG 21300, User Manual

Page: 32 / 35

32 electrolux
Please ensure that when the oven is
installed it is easily accessible for the
engineer in the event of a breakdown.
BUILDING IN BUILDING IN
BUILDING IN BUILDING IN BUILDING IN
The surround or cabinet into which the oven
will be built must comply with these
specifications:
$
the dimensions must be as shown in the
relevant diagrams;
$
the materials must withstand a
temperature increase of at least 60°C
above the ambient temperature;
$
proper arrangements must be made of
a continuous supply of air to the oven to
prevent the oven overheating.
Dimensions of the oven and recess required
are given in the relevant diagrams (in
millimetres).
593
Built-under recess dimensions
(kitchen unit with feet)
Dimensions are given in millimetres
593
Built-under recess dimensions
(kitchen unit without feet)
Dimensions are given in millimetres
In highly ventilated rooms, it is
recommended to make a 130 cm
2
minimum opening in the oven
cabinet.
Securing the appliance to the cabinet
- Open the oven door;
- fasten the oven to the cabinet placing
the four distance holders """""A
A
A A A""""" (supplied
with the appliance) which fit exactly
into the holes in the frame and then fit
the four wood screws "B"
"B"
"B" "B" "B" (not supplied
with the appliance).
When installing a hob over the oven, the
hob electrical connection and the oven one
have to be carried out separately for security
reasons and to let the oven be taken off the
cabinet easier, if necessary. Any extensions
must be made with cables suitable for the
required power.