62
5.
Take hold of the door glass panels on
their upper edge one after the other
and take them out of the guide by pull-
ing them upwards.
Cleaning the door glass panels
Clean the door glass panels thoroughly with a solution of water and washing
up liquid. Then dry them carefully.
Putting the door glass panels back.
1.
From above insert the door glass pan-
els one after the other into the door
profile at the bottom edge of the door
at an angle and lower them.
3
The two smaller panels first, then the
larger panel.
2.
Take hold of the door trim (B) at each
side, position it on the inside edge of
the door and plug the door trim (B) into
the upper edge of the door.