Problem
Possible cause
Remedy
The appliance does not
heat up.
The automatic cut-out is
activated.
Refer to “Automatic
switch-off”.
The appliance does not
heat up.
The fuse is released.
Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse releases
again and again, contact
a qualified electrician.
The lamp does not oper-
ate.
The lamp is defective.
Replace the lamp.
The pyrolytic cleaning
does not operate (the
time display shows “C3”).
You did not fully close the
door, or the door lock is
defective.
Fully close the door.
The display shows
“F102”.
• You did not fully close
the door.
• The door lock is defec-
tive.
• Fully close the door.
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows
“F102” again, contact
the Customer Care De-
partment.
The display shows an er-
ror code that is not on
this list.
There is an electrical fault. • Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again.
• If the display shows the
error code again, con-
tact the Customer Care
Department.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
12.
INSTALLATION
WARNING!
Refer to the Safety chapters.
The built-in unit must meet the
stability requirements of DIN
68930.
ENGLISH
27
Summary of Contents for EOC5440AA
Page 1: ...EOC5440AA EN OVEN USER MANUAL ...
Page 28: ...min 3 mm min 50 mm 28 www electrolux com ...
Page 35: ...ENGLISH 35 ...