18
Fig. 23
At this time, push the time function button
un-
til the "End of Cooking" symbol
and the arrow
symbol
will flash (Fig. 23). The control panel
will display the end of the cleaning cycle (that is,
the actual time + cooking duration time).
Push ' ' buttons to select the required end of cycle
time (Fig. 23). After a few seconds, the “Pyro”
writing will stop flashing, the acoustic signal will
stop while the symbol
will flash until the
pyrolytic cleaning cycle start.
This means that the the pyrolytic cleaning cycle
has been set at a programmed time and it is
necessary to remove the shelfs and all the oven
accessories from the oven.
At the set time, the pyrolytic cleaning cycle starts.
4. After some time, the door lock will be activated and
the related symbol
will be displayed.
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal
will be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, press
button
.
Replacing the Oven Light
If the oven bulb needs replacing, it must comply with the
following specifications:
- Electric power: 40 W,
- Electric rate: 230 V (50 Hz),
- Resistant to temperatures of 300°C,
- Connection type: E14.
These bulbs are available from your local Service Force
Centre.
To replace the faulty bulb:
1. Ensure the oven is disconnected from the electrical
supply.
2. Turn the glass cover anticlockwise.
3. Remove the faulty bulb and replace with the new one.
4. Refit the glass cover.
5. Reconnect to the electrical supply.
!
!
!
!
!
