Installing the shelf support rails
Install the shelf support rails in opposite se-
quence.
The rounded ends of the shelf support
rails must point to the front!
Cleaning the oven door
The oven door has two panels of glass in-
stalled one behind the other. You can remove
the glass panel to clean it.
The oven door can close if you try to re-
move the internal panel of glass before
you remove the oven door.
Removing the oven door and the glass
panel
1. Open the door fully and hold the two door
hinges.
2. Lift and turn the levers on the two hinges.
3. Close the oven door to the first opening
position (halfway). Then pull forward and
remove it from its seat. Place the door on
a stable surface protected by a soft cloth.
Clean the glass panel with water and soap.
Dry the glass panel carefully.
When the cleaning procedure is completed,
install the oven door. To install the oven door,
do the above steps in the opposite se-
quence.
Replacing the oven light bulb/cleaning
the glass cover
Warning!
Be careful! There is the risk of
electrical shock!
1. Turn the glass cover anti-clockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven light bulb with applica-
ble 300°C heat-resistant oven light bulb.
New oven light bulb must have the same
parameters as your previous one.
4. Install the glass cover.
What to do if…
Warning!
Refer to "Safety information"
chapter.
electrolux
11