3. Press or to set the minutes
and the hours for DURATION time.
4. Press to confirm. The display
shows flashing
.
5. Press or to set the hours and
the minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds for 2 minutes.
and time setting flash in the display.
The appliance deactivates.
7. Press any button to stop the acoustic
signal.
8. Turn the knob for the oven functions
to the off position.
6.6 Setting the MINUTE
MINDER
1. Press .
and "00" flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes.
When the time you set is longer than
60 minutes,
flash in the display.
3. Set the hours.
4. The MINUTE MINDER starts
automatically after 5 seconds.
After 90% of the set time, an acoustic
signal sounds.
5. When the set time ends, an acoustic
signal sounds for 2 minutes. "00:00"
and flash in the display. Press any
button to stop the acoustic signal.
6.7 COUNT UP TIMER
To reset the Count Up Timer, press and
hold and . The timer starts to count
up again.
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Using the core temperature
sensor
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
CAUTION!
Only use the core
temperature sensor supplied
with the appliance, or
genuine replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor (with the symbol
on the
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the front of
the appliance.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C. While
flashes, you can use the knob for the
www.electrolux.com
12
