ENGLISH
19
• Pour approx. 1.5 kg of coarse salt [NaCl] in container "A"
(an amount sufficient to fill the salt container up to the rim)
using the special funnel supplied (Figure 21).
Figure 21
• Remove any traces of salt from the filling hole, the
container thread and the closing cap seal.
• Refit the cap of container "A", turning it clockwise and
making sure it is tight.
The salt container always has water in it, therefore it is
normal if water comes out during filling.
IMPORTANT:
only salt may be placed in the salt con-
tainer. Do not introduce any other chemi-
cal substances such as detergent, rinse
aid or descaling agent, since these would
inevitably damage the appliance. Such
damage invalidates any warranty and
relieves the manufacturer of all liability.
IMPORTANT:
The message
SAL 0
may appear for
several wash cycles even after topping-up
the salt, as the salt must circulate in the
entire system. Correct operation of the
dishwasher is not, however, affected.
NaCl
(1,5 kg)
!
!
