68
Refrigerator temperature set (value is blinking)
when the "F" knob is rotated and for a while
afterwards.
Freezer temperature set (value is blinking) when
the "B" knobis rotated and for a while
afterwards.
5. Super cooling symbol
Visible, when the appliance runs in super cooling
mode. See also the chapteron freezing.
6. High temperature symbol
Visible, when the temperature in the refrigerator is
too high.
See also the description on the display
background colour.
7. Shopping symbol
Visible, when the appliance runs in shopping
cooling mode. See also the chapter on using the
refrigerator.
Display background colour
By default the display background is blue.
While whatever button or knob is used the
background turns bright blue and remains so for a
while.
The display background turns red, if the temperature
inside the freezer is too warm (alarm). If this is the
case, the digits show blinking the warmest
temperature inside the freezer, the high temperature
symbol flashes and an acoustic alarm signal is
shown.
The temperature might be too warm in the following
cases:
Immediately after switching on
The freezer door was left open for a longer time
There is an operating trouble in the freezer
To switch the alarm sound off press the "E" button.
The display returns to showing the ambient
temperature, however the background remains red
until the freezer cools down properly.
Should you press no button during alarm, press the
"E" button when the sound finishes to see the
warmest temperature reached during the alarm.
Handling the appliance
Putting it into use
Place the accessories into the appliance then plug
to the mains socket.
Press the "A" button. The backlight of the display
turns on.
The applince is ready to use.
Pressing the "A" button again the appliance is off,
but still under voltage.
Controlling the temperature, setting
The thermostats interrupt the cooling automatically
for more or less time depending on the setting then
restarts it assuring the required temperature.
Temperature of the refrigerator and freezer can be
set by knobs "F" and "B", respectively. The set
temperature is seen blinking on the display.
For everyday use medium setting, i.e. +5 °C in the
refrigerator and colder than -18 °C is the freezer is
recommended.
Allow the appliance to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
appliance.
The temperature coming about in the refrigerator is
effected by not only the position of the thermostat
but the ambient temperature, frequency of door
openings and the quantity of food put into it newly,
etc.
When the coldest temperature possible is
set - in case of increased demand e.g.
during heatwaves - the compressor may
operate continually. This does not cause
damages to the appliance.
How to use the refrigerator
For adequate cooling developing interior air
circulation is necessary. For this reason you
are asked not to cover the air circulation gaps
behind the shelves (e.g. with tray etc.).
Do not put hot food into the refrigerator.
Allow it to reach room temperature
naturally. In this way the unnnecessary frost
building up can be avoided.
Foods can take over odours from each
other. So it is essential to put foods in
closed dishes or wrap them in cellophane,
aluminium foil, grease-proof paper or cling film
before placing them into the refrigerator. This
way foods will keep their moisture e.g.
vegetables will not dry out after some days.
GB
