Electrolux EID60010X, User Instructions

Page: 15 / 35

primo avviamento electrolux 15
Installation of filter cartridge and Co2 Bottle
Open the filter cartridge access door as
shown in Fig.8, undoing the 2 fixing
screws and pulling the panel towards
the left, to remove the hooks from the
fixed structure
Fig.8
Remove the cap and connect the filter
cartridge to the head rotating it
counter-clockwise (Fig. 9).
In case of water leaks, dry the whole
area with a cloth.
Fig. 9
Disposable bottle
Co2 bottle is on the left side of the
appliance. Remove the green cap and
screw the pressure reducer onto the
bottle. Make sure the Co2 bottle is
properly screwed (Fig. 10).
Open the valve on the reducer until
reaching a pressure of approx. 3 bar.
Pressure can be adjusted up to a max.
of approx. 4 bar to obtain a higher
carbonation level. To reach a good
carbonation level, it is necessary for
CO2 pressure to be =.5 bar higher than
water pressure.
Close the side door tightening its
screws.
Fig. 10