Electrolux EID60010X, User Instructions

Page: 12 / 35

12 electrolux installazione
Connection to water supply
Fig. 4
Mod. A Mod. B
Fig. 5
Check the presence of the following
in the undersink compartment:
an intercepting tap for cold and hot
water line.
The lack of the above mentioned
items makes the connection
impossible. Please have your system
checked by a plumber installer.
Take the installation kit for water
supply and carry out the connection
as explained:
1. Replace hot water and cold
water flexible pipes with the
supplied kit (Fig. 4).
2. Connect the inlet pipe (H2O IN)
to the cold water union “T”;
3. Connect the dispensing tap to
the COLD H2O OUT pipe coming
out of the appliance;
4. Connect the dispensing tap to
the SODA OUT pipe coming out
of the appliance.
Warning
Only connect to cold
potable water supply
Hot water
H2O IN
Warning
Cold water
H2O pressure must be
between 2.0 and 3.5 bar.
In case of higher pressure,
a pressure reducer must
be installed by a plumber
installer.