Before You Call
43
Self Clean Problems
Problem
Solution
Self Clean does not work or is performing poorly
Review steps for
“Read Before Starting Self Clean:”
beginning on
.
Perform the following check: Press Broil; Press
START
. Place your
hand near the handle on the oven door. Between the door and the
control panel you should feel a rush of air on your hand. If so, your unit
is functioning properly and you have had a Power Failure in your home.
If no air stream is present, call a service technician to replace your
cooling fan.
Soil not completely removed after self clean.
Self clean was interrupted. Review instructions on
on
.
Excessive spills on oven bottom. Remove excessive spills before
starting self clean.
Failure to clean soil from the oven frame, the door liner outside the oven
door gasket, and the small area at the front center of the oven bottom.
These areas are not in the self-cleaning area, but get hot enough to
burn on residue. Clean these areas before starting the self-cleaning
cycle. Burned-on residue can be cleaned with a stiff nylon brush and
water or a nylon scrubber. Be careful not to damage the oven gasket.
Summary of Contents for EI30EW38TS
Page 1: ...Use Care Guide Single Wall Oven A00538305 Rev A May 2017 ...
Page 45: ......
Page 46: ...electrolux com shop ...