32
Setting Oven Controls
To cancel the Sabbath mode:
1.
Press
CANCEL.
2.
Press and hold
cook time
and
delay start
for 3 seconds.
3.
SAB
will disappear from the display.
4.
The oven may now be used for regular cooking.
What to do after a power failure or power interruption when
Sabbath mode is active:
Should a power failure or interruption occur during the Sabbath
holidays, the appliance will shut off.
SF
will appear in all the
control display, indicating a Sabbath mode failure (
Sabbath Failure mode will remain and the oven will not work
until Sabbath mode is cancelled.
After Sabbath mode is cancelled, Sabbath mode settings may
be entered again.
Adjusting Oven Temperatures
Your appliance has been factory calibrated and tested to ensure
accurate baking temperatures. For the first few uses, follow
your recipe times and temperature recommendations carefully.
If you think the oven is cooking too hot or too cool for your
recipe times, you may adjust the control so the oven cooks
hotter or cooler than the oven temperature displayed.
IMPORTANT!
Do not use oven thermometers such as those
found in grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much as
20°F to 40°F degrees from actual temperatures.The oven
temperature may be increased as much as +35°F (+19°C) or
decreased -35°F (-19°C) from the factory calibrated settings.
To increase or decrease the oven temperature by 20°F:
1.
Press and hold
bake
until factory offset temperature of
0
(zero) and
UPO
should appear in the display.
2.
Enter
2 0
using numeric keys.To offset the oven by -20°F,
press
self clean
to toggle to the minus (-) setting.
Press
START
to accept change.
Oven temperature adjustments will not change the Broil or Self
Clean function temperatures.
Restoring Control to Factory Default Settings
Your appliance is set with a number of predetermined oven con-
trol settings. Over time you may make changes to the original
factory settings. The following functions or features have user
programmable options or adjustments that may have been
changed from the default settings.
•
Clock 12-hour or 24-hour display mode
•
12 Hour Energy Savings or Continuous Bake mode
•
Oven temperature display mode (F° or C°)
•
Any oven temperature adjustment made (UPO)
IMPORTANT!
Before restoring, be aware that any previous
changes made to the oven control settings will be erased once
the keypad is pressed. This includes any temperature offset
made for the oven when baking.
To restore factory default settings:
1.
Press and hold numeric key
7
.
2.
The display will beep.
3.
rSt PS (reset press start)
will appear in the display.
4.
Press
START
to accept the change.
5.
The controls have been reset to the original factory
settings.
Figure 28: Display showing Sabbath failure
Figure 29: Control is ready to reset to default settings
Summary of Contents for EI30EW38TS
Page 1: ...Use Care Guide Single Wall Oven A00538305 Rev A May 2017 ...
Page 45: ......
Page 46: ...electrolux com shop ...
