background image

3

Safety

Important safety instructions

General Safety

Safety Precautions

Do not attempt to install or operate your unit 

until you have read the safety precautions 

in this manual. Safety items throughout this 

manual are labeled with a Danger, Warning, 

or Caution based on the risk type.

Definitions

       This is the safety alert symbol. It is 

used to alert you to potential personal 

injury hazards. Obey all safety messages 

that follow this symbol to avoid possible 

injury or death.

•  Do not store or use gasoline or other 

flammable liquids near this or any 

other appliance. Read product labels 

for warnings regarding flammability 

and other hazards.

•  Do not operate the refrigerator in the 

presence of explosive fumes.

•  Avoid contact with any moving parts 

of the automatic ice maker.

•  Remove all staples from the carton to 

avoid injury. Staples can also damage 

finishes if they come in contact with 

other appliances or furniture.

Child Safety

Packing Materials:

•  Packing cartons covered with rugs, 

bedspreads, plastic sheets, or stretch 

wrap may become airtight chambers 

and can quickly cause suffocation.

•  Destroy or recycle the product’s carton, 

plastic bags, and any other exterior 

wrapping material immediately after 

the refrigerator is unpacked. Children 

should never play with these items.

Child Entrapment and Suffocation:

•  These problems are not limited to the 

past. Whether junked, abandoned, 

or temporarily stored (even for a few 

hours), unattended refrigerators and 

freezers are dangerous. Please take 

the precautions listed below.

Proper Disposal of Refrigerators/

Freezers

We strongly encourage responsible 

appliance recycling/disposal methods. 

Check with your utility company or visit 

www.energystar.gov/recycle for more 

information on recycling your old refrigerator.

Before you recycle or dispose of your 

old refrigerator/freezer:

•  Remove the doors.
•  Leave the shelves and baskets in place 

so children may not easily climb inside.

•  Have refrigerant and compressor oil 

removed by a qualified service technician.

WARNING

WARNING indicates a potentially 

hazardous situation which, if not 

avoided, could result in death or serious 

injury.

IMPORTANT

Indicates installation, operation, or 

maintenance information which is 

important but not hazard-related.

CAUTION

CAUTION indicates a potentially 

hazardous situation which, if not 

avoided, may result in minor or 

moderate injury.

DANGER

DANGER indicates an imminently hazardous 

situation which, if not avoided, will result in 

death or serious injury.

WARNING

Please read all safety instructions before 

using your new refrigerator.

Summary of Contents for EI23BC82SS












































Reviews: