Electrolux EI23BC82SS Use And Care Manual Download Page 37

Page: 37 / 43

Care and Cleaning

Care and cleaning tips

Part

Cleaning Agents Tips and Precautions

Interior & Door

Liners

• Soap and water

• Baking soda

and water

• Use two tablespoons of baking soda in

one quart of warm water.

• Be sure to wring excess water out of

sponge or cloth before cleaning around

controls, light bulb or any electrical part.

Door Gaskets

• Soap and water

• Wipe gaskets with a clean soft cloth.

Drawers & Bins

• Soap and water

• Use a soft cloth to clean drawer runners

and tracks.

• Do not wash any removable items (bins,

drawers, etc.) in dishwasher.

Glass Shelves

• Soap and water

• Glass cleaner

• Mild liquid sprays

• Allow glass to warm to room

temperature before immersing in warm

water.

Toe Grille

• Soap and water

• Mild liquid sprays

• Vacuum

• Remove toe grille (see Installation Instructions).

• Vacuum both sides and wipe with sudsy

cloth or sponge. Rinse and dry.

Exterior &

Handles

(Stainless Steel

Models Only)

• Soap and water

• Stainless steel

cleaners

• Never use CHLORIDE or cleaners with

bleach to clean stainless steel.

• Clean stainless steel front and handles with

non-abrasive soapy water and a dishcloth.

Rinse with clean water and a soft cloth.

• Use a non-abrasive stainless steel cleaner.

These cleaners can be purchased at most

home improvement or major department

stores. Always follow manufacturer’s

instruction. Do not use household

cleaners containing ammonia or bleach.

• NOTE: Always clean, wipe and dry with

grain to prevent scratching.

• Wash the rest of the cabinet with warm

water and mild liquid detergent. Rinse

well and wipe dry with a clean soft cloth.

Occasion Tips

Short

Vacations

• Leave refrigerator operating during vacations of three weeks or less.

• Use all perishable items from refrigerator compartment.

• Turn automatic ice maker off and empty ice bucket, even if you will

only be gone a few days.

Long

Vacations

• Remove all food and ice if you will be gone one month or more.

• Turn the cooling system off (see Controls section for location of On/

Off button) and disconnect power cord.

• Turn water supply valve to closed position.

• Clean interior thoroughly.

• Leave both doors open to prevent odors and mold build-up. Block

doors open if necessary.

Moving

• Remove all food and ice.

• If using a handcart, load from the side.

• Adjust rollers all the way up to protect them during sliding or moving.

• Pad cabinet to avoid scratching surface.

Vacation and moving tips

Summary of Contents for EI23BC82SS












































Search results

Summary of Contents for EI23BC82SS

Reviews:

Related manuals for EI23BC82SS

Brands by name

Popular brands

Electrolux EI23BC82SS, Use And Care Manual

Search results

Summary of Contents for EI23BC82SS

Reviews:

Related manuals for EI23BC82SS

Brands by name

Popular brands