Removing the dirt:
1. –
Remove immediately:
melting plas-
tic, plastic foil, and food containing
sugar.
–
Stop the appliance and let it cool
down
before you clean: limescale
rings, water rings, fat stains, shiny met-
allic discolorations. Use a special
cleaner for glass ceramic or stainless
steel.
2. Clean the appliance with a damp cloth
and some detergent.
3. At the end
rub the appliance dry with
a clean cloth.
Periodic maintenance
Periodically speak your local Service Force
Centre to check the conditions of the gas
supply pipe and the pressure adjuster, if fit-
ted.
What to do if…
Problem
Possible cause
Remedy
There is no spark when lighting
the gas
• There is no electrical supply
• Make sure that the unit is con-
nected and the electrical sup-
ply is switched on.
• Examine the house electrical
installation fuse.
• Burner cap and crown are
placed uneven
• Make sure that the burner cap
and crown are in correct po-
sitions.
The flame is blow out immedi-
ately after ignition
• Thermocouple is not heated
sufficient
• After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
The gas ring burns unevenly
• Burner crown is blocked with
food residues
• Make sure that the injector is
not blocked and the burner
crown is clear of food parti-
cles.
If there is a fault, first try to find a solution to
the problem yourself. If you cannot find a sol-
ution to the problem yourself, speak your
dealer or the local Service Force Centre.
If you operated the appliance incorrectly,
or the installation was not carried out by
a registered engineer, the visit from the
customer service technician or dealer
may not take place free of charge, even
during the warranty period.
These data are necessary to help you
quickly and correctly. These data are
available on the identification plate from
the injectors kit.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are
available at Service Force Centre and au-
thorized spare parts shops.
Technical data
Hob dimensions
Width:
580 mm
Height:
510 mm
Hob recess dimensions
Width:
550 mm
Height:
470 mm
Heat input
Rapid burner:
2,9 kW
Semi-rapid burner:
1,9 kW
Auxiliary burner:
1,0 kW
TOTAL POWER:
7,7 kW
Electric supply:
230 V ~ 50 Hz
Category:
II2H3B/P
Gas connection:
G 1/2"
Gas supply:
G20 (2H) 20 mbar
Appliance class:
3
18
electrolux
Summary of Contents for EHT 6415
Page 31: ...electrolux 31 ...