Electrolux EHT 6415, User Manual, Page: 16 / 32

Description of the appliance
Cooking surface layout
2
1
5
4
3
1 Semi-rapid burner
2 Semi-rapid burner
3 Control knobs
4 Auxiliary burner
5 Rapid burner
Control knobs
Symbol Description
no gas supply / off po-
sition
ignition position / max-
imum gas supply
Symbol Description
minimum gas supply
Operating the appliance
Ignition of the burner
Warning! Be very careful when you use
open fire in kitchen environment.
Manufacturer decline any responsibility
in case misuse of the flame
Always light the burner before you put
cookware.
To light the burner:
1. Turn the control knob counterclockwise
to the maximum position ( ) and push
it down.
2. Keep the control knob pushed for ap-
proximately 5 seconds; this will let ther-
mocouple to warm up. If not, the gas
supply will be interrupted.
3. Adjust the flame after it is regular.
If after some tries the burner does not
light, check if the crown and its cap are
in correct positions.
3
4
2
1
1 Burner cap
2 Burner crown
3 Ignition candle
4 Thermocouple
Warning! Do not keep the control knob
pushed for more than 15 seconds.
If the burner does not light after 15 sec-
onds, release the control knob, turn it
into off position and try to light the burner
again after minimum 1 minute.
16 electrolux