21
What to do iff
…
Rectifying faults
It is possible that faults have been caused by a minor
error, which you can correct yourself with the help of
the following instructions. Do not attempt any further
repairs if the following instructions do not help in
each specific case.
1
Warning!
Repairs to the appliance are only to
be carried out by approved service engineers.
Improperly effected repairs may result in con-
siderable risk to the user. If your appliance
needs repairing, please contact your specialist
dealer or customer service.
What do I do if …
… the cooking zones do not work?
Check whether
–
the mains fuse (fuse box) is intact or the circuit
breaker (at the household fuse box) has tripped. If
the circuit breaker trips or the fuse blows several
times, please call an approved electrician.
–
the appliance has been properly switched on,
–
the control indicators in the control panel are on,
–
the correct cooking zone has been switched on,
–
the cooking zones are set to the desired heat set-
ting for cooking,
–
the cooking zones have been switched off by the
safety switch (see section “Safety functions”).
… the cooking zones cannot be switched
on?
Check whether
–
the control panel is locked (see section “Locking/
Unlocking the Control Panel”).
–
more than 10 seconds have elapsed between op-
erating the On/Off button and switching on the de-
sired cooking zone, (see section “Switching on the
appliance”).
–
the sensor fields are partially covered by a damp
cloth or with liquid.
… the display suddenly changes to
_
or
h
for residual heat?
Check whether
–
the On/Off button has been operated accidentally.
–
the sensor fields are partially covered by a damp
cloth, liquid or similar.
–
the safety switch has been activated.
… after switching off the cooking zones,
neither
_
nor
h
for residual heat appears
in the display?
Check whether
–
the cooking zone was only used for a short period
and is therefore not hot enough.
If the cooking zone is hot, call the customer service.
… a cooking zone cannot be switched
off?
Check whether
–
the touch fields are partially covered by a damp
cloth or liquid.
–
the lock is activated.
… a cooking zone cannot be switched
on?
Check whether
–
the lock is activated.
…
f
is shown in the display?
Check whether the cooking zone has been overheat-
ed.
This indicator lights up to show overheating, elec-
tronic faults or for safety reasons.
If you call in customer service to resolve a problem
caused by incorrect operation of the appliance, the
customer service engineer's visit will not be free of
charge, even during the warranty period.
Summary of Contents for EHS 6650 P
