13
Touch sensor field
+
until it reaches the required
heat
1
to
8
. The set heat setting will be displayed
first. After five seconds
a
(= automatic warm up
function) will replace the heat setting in the display.
At the end of the warm up time the heat setting will
be shown again.
3
If during the automatic warm up function you
select a higher setting, eg. from
3
to
5
, the
warm up time is adjusted to match. If you se-
lect a lower setting, the warm up time ends at
once.
2
If you start cooking again on a cooking zone
that is still warm, the automatic warm up func-
tion uses the residual heat. This saves time
and energy.
3
If you again wish to switch on a cooking zone
on which hot items are already standing, you
should always select the required heat setting
with the
-
sensor field. In this way you can
avoid making the food boil over as a result of
the extra burst of heat from the automatic
warm up.
Cooking without the Automatic
Warm up Function
If you wish to use the cooking zone without automat-
ic warm up, select the required heat setting with the
-
sensor field.
1.
Switch on the appliance and select the desired
cooking zone using the cooking zone selection
buttons.
2.
Touch sensor field
-
to select the required heat
setting from
9
to
1
.
3
You can adjust the heat setting at any time us-
ing the
+
and
-
buttons, providing the cook-
ing zone has been selected.
Switching off a cooking zone
1.
Select the desired cooking zone using the cooking
zone buttons.
2.
Press the
+
and
-
buttons simultaneously to
switch off.
1
When the rings are still hot cooking should be
carried out without automatic warm up.
Summary of Contents for EHS 6650 P
