background image

3

Important Safety Information

You MUST read these warnings carefully before installing or using the
appliance. If you need assistance, contact our Customer Care Department
on 01635 522799

Installation

This appliance must be installed by qualified
personnel, according to the manufacturer ’s
instructions and to the relevant British Standards.

Any gas installation must be carried out by a
registered CORGI installer.

Remove all packaging before using the appliance.

Ensure that the gas and electrical supply complies
with the type stated on the rating plate, located near
the gas supply pipe.

Do not attempt to modify the appliance in any way.

Child Safety

This appliance is designed to be operated by adults.
Do not allow children to play near or with the
appliance.

The appliance gets hot when it is in use. Children
should be kept away until it has cooled.

Children can also injure themselves by pulling pans
or pots off the hob.

During Use

This appliance is intended for domestic cooking only.
It is not designed for commercial or industrial
purposes.

When in use a gas cooking appliance will produce
heat and moisture in the room in which it has been
installed. Ensure there is a continuous air supply,
keeping air vents in good condition or installing a
cooker hood with a venting hose.

When using the hob for a long period time, the
ventilation should be improved, by opening a
window or increasing the extractor speed.

Do not use this appliance if it is in contact with water.
Do not operate the appliance with wet hands.

Ensure the control knobs are in the ‘OFF’ position
when not in use.

When using other electrical appliances, ensure the
cable does not come into contact with the hot
surfaces of the cooking appliance.

Unstable or misshapen pans should not be used on
the hob as unstable pans can cause an accident by
tipping or spillage.

Never leave the hob unattended when cooking with
oil and fats.

Never use plastic or aluminium foil dishes on the
hob.

Perishable food, plastic items and areosols may be
affected by heat and should not be stored above or
below the hob unit.

Service

This appliance should only be repaired or serviced
by an authorised Service Engineer and only genui-
ne approved spare parts should be used.

Environmental Information

After installation, please dispose of the packaging
with due regard to safety and the environment.

When disposing of an old appliance, make it
unusable, by cutting off the cable.

Keep this instruction book for future

reference and ensure it is passed on

to any new owner.

Summary of Contents for EHG 679 B





















Reviews: