background image

2

These instructions are only for the countries stated by the symbol

printed on the front cover of this instruction book.

During Operation

• This appliance has been designed to be operated by

adults and children under supervision. Young children

MUST

 

NOT

 be allowed to tamper with the controls or play

near or with the oven.

• This appliance  has been designed for cooking edible

foodstuff and to be used for domestic  non-professional
purposes only. It must not be used for any other
purpose.

• It is 

dangerous 

to alter the specification in any way.

• For hygiene and safety reasons, this appliance should

be kept clean at all times. A build-up of fats or other
foodstuff could result in a fire.

• Accessible parts of this appliance may become hot

when it is in use. Children should be 

KEPT

 

AWAY

 until it

has cooled.

• Under no circumstances should you attempt to repair

the appliance yourself. Repairs carried out by
unexperienced persons may cause injury or serious
malfunctioning. Refer to your local Zanussi Service
Centre. Always insist on genuine Zanussi spare parts.

• Ensure that all control knobs are in the OFF position

when not in use.

• Should you connect any electrical tool to a plug near

this cooking appliance, ensure that electric cables are
not in contact with it and keep them far enough from
the heated parts of this appliance.

If the appliance is out of order, disconnect it from the
electric supply.

About Installation, Cleaning
and Manteinance

• It is mandatory that all operations required for the

installation are carried out by a qualified or competent
person, in accordance with existing rules and
regulations.

• Disconnect the appliance from the electrical supply,

before carrying out any cleaning or manteinance work.

• Ensure a good ventilation around the appliance. A

poor air supply could cause lack of oxygen.

ENGLISH

    For Your Safety

 

These warnings are provided in the interest of safety. You 

MUST

 read them carefully before installing or

using the appliance.
It is most important that this instruction book should be retained with the appliance for future reference.
Should the appliance be sold or transferred, always ensure that the book is left with the appliance in
order that the new owner can get to know the functions of the appliance and the relevant warnings

.

• Ensure that the gas supply complies with the gas type

stated on the identification label, placed near the gas
supply pipe.

The use of a gas cooking appliance results in the
production of heat and moisture in the room in
which it is installed. Ensure that the kitchen is
well ventilated: keep natural ventilation holes
open or install a mechanical ventilation device
(mechanical extractor hood).

Prolonged intensive use of the appliance may
call for additional ventilation, for example
opening of a window, or more effective
ventilation, for example increasing the level of
mechanical ventilation where present.

• Once you removed all packaging from the appliance,

ensure that it is not damaged and the electric cable is
in perfect conditions. Otherwise, contact your dealer
before proceeding with the installation.

• The manufacturer disclaims any responsability

should all the safety measures not be carried out.

The symbol 

on the product or on its packaging

indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
city office, your household waste disposal service or the
shop where you purchased the product.

MANUFACTURER:

ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna 298 - 47100 FORLI’ (Italy)

Summary of Contents for EHG 318













Reviews: