background image

3

The following symbols will be found in the text to
guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

)

Guide to Use the instructions

2

1

3

1

Rapid Burner - 2,8 kW

2

Auxiliary Burner - 1,0 kW

3

Burner Control Knobs

Contents

Instruction for the User

Description of the appliance

Burner Control Knobs

The hob burner control knobs are situated on the hob front
panel. The symbols on the knobs mean that :

z

there is no gas supply

there is maximum gas supply / Ignition setting
there is minimum gas supply

Lighting the burners

For easier lighting, proceed before putting a
pan on the pan support.

1. Push the relevant knob down and turn it anti-clockwise

until it reaches the "maximum" position.

2. After lighting the flame, keep the knob pushed down

for about 5 seconds. This will allow the "thermocouple"
(Fig.1 lett.D) to be heated and the safety device to be
switched off,
otherwise the gas supply would be interrupted.

3. Then, check the flame is regular and adjust it as

required.

Description of the appliance .............................. 3

Instruction for the User ...................................... 3

Cleaning and Maintenance ................................ 4

Guarantee - After Sales Service........................ 5

Technical Data .................................................. 6

Instruction for the Installer ................................. 6

Gas connection ................................................. 7

Electrical Connection ........................................ 8

Adaptation to different
types of gas ....................................................... 9

Building In ........................................................ 10

Possibilities for insertion ................................. 10

MANUFACTURER:

MANUFACTURER:

MANUFACTURER:

MANUFACTURER:

MANUFACTURER:
ELECTROLUX HOME PRODUCTS ITALY S.p.A.
Viale Bologna, 298
47100 FORLÌ (Italy)

Summary of Contents for EHG 30210

















Reviews: