background image

What to do the first time of usage 

 

On its first usage it is always suggestible to heathen the 
appliance on its maximum speed for about 10 minutes, by 
positioning on the cooking spaces a pot containing water so to 
avoid eventual unpleasant smells caused by the thermal 
isolation or production’s residuals. Air the room during the 
entire operation  

During the first minutes of working 

IT IS 

ABSOLUTELY NORMAL

 that the appliance emits 

smoke and unpleasant smells.  
This inconvenience will disappear after a few minutes 
of usage. 

 
 

Usage instructions 

 

Before using the appliance, remove all the 
packing materials, advertising labels 
included and eventual protective film. 

 

 

The control knobs of the cooker 
top 

 

The cooking areas can be used by turning the correspondent 
knob. (Figure 1). 

 

The knob can be turned on 7 different positions,  from "0" 
(turned off) to "6" (maximum speed). 

 

The hob has is equipped of a pilot light that turns on when the 
hob is working.  
 

 

For a correct use of the burners.

 

 

For a better performance of the hobs and a smaller electrical 
consume: (Figure 2): 
 

 

use recipients with a thick bottom only, that permit a better 
heath distribution; 

 

prefer recipients with a flat bottom, that assure an ideal 
heath transmission; 

 

use recipients which dimensions fit with the hob, in order to 
cover completely the cooking area and to grant the use of 
the all heath available; 

 

use recipients with a smooth bottom only. Recipients with a 
rough bottom and/or damaged, in fact, may scratch the hob 
surface; 

 

make sure that the pots’ bottoms are always dried and 
cleaned, to grant a proper contact and a long endurance of 
the hob and pots themselves;   

 

do not lean pots or pans on the hob edge;  

 

do not use the cooking areas as a support or working top ; 

 

do not put any kind of material between the hob and the pot; 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

4

 

 

Fig. 1 

 

 

 

 

 
 

Summary of Contents for EHE3343X














Reviews: