background image

Index 

 

 

Per l'Utente  

 

For your Safety                             2 

 

Guide to the instructions’ reading   3 

 

Use instructions                              4 

 

Cleaning and maintenance             5 

 

Assistance and spare parts            6 

 

Guarantee conditions  

         6 

 
 

Suggestions for the 
environment protection.  

 

All the materials used are compatible with the environment and 
recyclable. We be you to give your contribute for the 
environment conservation, using the proper waste disposals 
channels. 

 

The unused appliances are not waste without value. Through 
the ecological disposal, different materials used for the 
production of Your appliance can be reclaimed.  

 

Please take information on the actual possibilities for the 
ecological disposal by your specialized retailer, or through your 
local city office. 

 

Before scrapping the appliance, cut the cable the supply cable 
in order to make it useless.   

 

 
For the installer

 

 

Technical features  

  7 

 

Instructions for the installer   

      7 

 

Connection to the electricity supply        8 

 

Electrical diagram                                   9  

 

Insertion and connection        

     11-12 

 
 
 
 

The symbol   

   on the product, or on the documents 

accompanying the product, indicates that this appliance may 
not be treated as household waste. Instead it shall be handed 
over the applicable collection point for the recycling of 
electrical and electronic equipment. 
Disposal must be carried out in accordance with local 
environmental regulations for waste disposal. 
For more detailed information about treatments, recovery and 
recycling of this product, please contact your local city office, 
your household waste disposal service or the shop where you 
purchased the product.

 

 

 

 

Guide to the instructions reading

 

 

These symbols will help you in finding quickly the most important information. 

 
 
 

Safety information 
 
 
"Step by step" instructions 
 

 

Useful advices and suggestions 
 
 
 
 

 

Information related to the environment protection 
 
  
 This appliance is in conformity with the following  
 Directives CEE: 

- 73/23 

90/683 

(related to the Low Voltage); 

-89/336 

(related to the  Electromagnetic 

Compatibility); 

90/396 

(related to the Gas working appliances) 

- 93/68 

(related  to the General Directives and 

following modifications.

 
 
 
 
 

 
3

 

 
 
 

These instructions are only valid for the countries 

indicated by the symbols  on the cover of the 

instruction handbook and the appliance.

 

Summary of Contents for EHE3343X














Reviews: