background image

Other Features

 control lock

To avoid having someone accidentally start or 

stop the dryer, press the 

control lock 

button. 

To unlock the controls, press the 

control lock 

button again.

mute sound

A chime will sound at the end of the cycle (and 

periodically during 

extended tumble

 and 

wrinkle release

) if this option is not activated. 

Activating the mute sound option will not mute 

all sounds emitted by the console. This option 

only silences the end of cycle tone.

delay start

Press 

delay 

start to select a dry time 

convenient to your schedule or during off peak 

energy hours. The delay time selected will be 

displayed and begin counting down when you 

select 

start

. A cycle can be delayed up to a 

maximum of 6 hours.

Status Display/Timer

The estimated total cycle time will be 

displayed when the cycle is selected. The 

estimated remaining cycle time is displayed 

throughout the cycle.

Reversible Door

Your dryer is equipped with a reversible door. 

The door can be hinged on the right or left side.

NOTE

For step-by-step instructions on DOOR 

REVERSAL, refer to the Installation 

Instructions supplied with this dryer.

Controls and Settings

1

2

3

1.  Cycle Countdown

3.  Maintenance Indicators

2.  Delay Start Timer

13

Summary of Contents for EFLS210TIS























Reviews: