14
•
Check that the side wall units between which to
install the hood are sufficiently heavy for
installing the hood.
Otherwise mount the brackets to use as
additional supports:
a.
Insert each bracket from the rear inside the
hood through the opposite slots
.
b.
Fix the brackets with the screws and
threaded bushes.
Screw the headless screws halfway.
They will serve to adjust the position of the
hood at the moment of installation.
Fig. 9
Note:
the position of the brackets can be
adjusted during installation, suitably loosening
and retightening the screws that fix them to the
hood.
Fixing a furniture door to the
visor
•
Remove the extraction grill or the metal grease
filter.
•
Remove the visor (freeing the locking releases
Fig. 10, I
).
•
Apply the drill holes diagram N3 on the rear of
the furniture door (
Fig. 11,J
-the arrow on the
diagram should face the upper border of the
furniture door), perform blind holes as indicated
(
K-Fig. 11
).
•
Place the visor over the furniture door and affix
with 8 screws (
Fig. 11,L
).
•
Refit the cover on the cooker hood firstly in the
upper track (
Fig. 12-M1
), then in the lower
track (
Fig. 12-M2
).
Ø 5x18
Ø 5x10
Fig. 9
Rear view
Fig. 10
I
I
Ø 2,5mm x 6mm max
6mm
N3
Ø 4,5 x 13
J
L
Fig. 11
K
Fig. 12
M1
M2
M2
M1
