Electrolux EFEP916 Installation & User Manual Download Page 62 | Manualshive

Page: 62 / 68

Electrolux EFEP916 Installation & User Manual Download Page 62

62 electrolux.com.au

IMPORTANT

At the beginning of Pyrolytic cleaning the door will
automatically lock and the will appear on the
display. During the Pyrolytic cleaning cycle there
may be some burn off odours. It is advised to keep
the room well ventilated during this cycle.

The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door. This will only happen when safe temperatures
are reached.
When the pyrolytic cleaning function is on, it is advisable
not to use a cooktop. This may cause overheating and
damage.

NOTE: The cooling fan will operate at an increased speed
for Pyrolytic cleaning and will continue to run until the oven
has cooled down. This is normal.

It is recommended to clean the oven regularly to keep it in
its best condition.

After Pyrolytic cleaning

After cool-down wipe the ash out of the oven with a soft
damp cloth and warm water.
To restore the enamel shine to more difficult areas, use a
damp cloth with vinegar and detergent.

CAUTION

Do not turn off the mains power supply to the
oven during the Pyrolytic cycle. This could damage
the appliance.

CLEANING YOUR APPLIANCE WITH PYROLYTIC

CLEANING

(CONTINUED)

«
...
60
61
62
63
64
...
»

Summary of Contents for EFEP916





































































Reviews:

No comments