Clock function
Application
END
To set when the appliance deactivates. You can use
Duration and End at the same time (Time delay) if you
want the appliance to activate and deactivate automat-
ically later.
7.2
Count Up Timer
The Count Up Timer is not
activated if Duration and End
are set.
The Count Up Timer starts to count when
the appliance starts to heat.
To reset the Count Up Timer, touch
and
at the same time until the display
shows "00:00" and the Count Up Timer
starts to count up again.
7.3
Setting the DURATION
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows
.
flashes in the display.
3.
Use
or
to set the minutes for
DURATION.
4.
Touch
to confirm.
5.
Use
or
to set the hours for
DURATION.
If you touch while you
set the DURATION, the
appliance switches to the
setting of the END
function.
6.
When the set time ends, an acoustic
signal sounds for two minutes.
and time setting flash in the display.
The appliance deactivates.
7.
Touch a sensor field to stop the
acoustic signal.
8.
Deactivate the appliance.
7.4
Setting the END
1.
Activate the appliance and set an oven
function and temperature.
2.
Touch again and again until the
display shows
.
flashes in the display.
3.
Use
or
to set the END and
to confirm. First you set the minutes
and then the hours.
When the set time ends, an acoustic
signal sounds for two minutes.
symbol
and the time setting flash in the display.
The appliance deactivates.
4.
Touch a sensor field to stop the
acoustic signal.
5.
Deactivate the appliance.
7.5
Setting the MINUTE MINDER
Use the MINUTE MINDER to set a
countdown (maximum 2 h 30 min). This
function has no effect on the operation of
the oven. You can set the MINUTE
MINDER at any time and also when the
appliance is off.
1.
Touch .
and "00" flash in the display.
2.
Use
or
to set the MINUTE
MINDER. First you set the seconds,
then the minutes and the hours.
3.
Touch
and
at the same time
to reset the set time.
4.
Touch
or the MINUTE MINDER
starts automatically after five seconds.
When the set time ends, an acoustic
signal sounds for two minutes and 00:00
and flash in the display.
5.
Touch a sensor field to stop the
acoustic signal.
7.6
Setting the Time delay
function
The DURATION
and END
can be
used at the same time, if the appliance is
www.electrolux.com
12