22
Programming options
Objective
Implementation
Permanently program in
the audible signal which re-
minds you that the pro-
gramme is complete.
1.
Turn the programme selector to any programme.
2.
Press the AUDIBLE SIGNAL (SIGNAL) button and hold down
for approx. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
(SIGNAL) display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust detection of degree
of drying:
If the laundry is slightly dri-
er or slightly damper at the
end of the programme than
with the standard setting.
1.
Turn the programme selector to any programme.
2.
Press the AUDIBLE SIGNAL (SIGNAL) and SENSITIVE (SEN-
SITIV) buttons at the same time and hold down for approx. 5
seconds.
The current setting appears on the multi-display:
–
C0
: Setting for drier laundry
–
C1
: Standard setting
–
C2
: Setting for damper laundry
3.
Press the START/PAUSE button until the setting required ap-
pears on the multi-display.
4.
Turn the programme selector to OFF (AUS).
The setting is permanently programmed.
If the EMPTY WATER (BE-
HÄLTER) display is to re-
main permanently
deactivated when using an
external condensate drain.
1.
Turn the programme selector to any programme.
2.
Press the DOOR (TÜR) and SPECIAL CARE (SCHON) but-
tons at the same time and hold down for approx. 5 seconds.
The multi-display briefly displays ”
0
”
The EMPTY WATER (BEHÄLTER) display is permanently de-
activated.
The setting is cancelled as described under 1 and 2; the multi-
display however briefly displays ”
1
” (rather than ”
0
”).
