14
Starting the programme
Press the START/PAUSE button. The programme is started.
The programme progress display and the display showing the level of dry-
ness show drying progress.
Changing programme
To change a programme which has been selected by mistake once the pro-
gramme has started, first turn the programme selector to OFF (AUS) and
then reset the programme.
3
The programme can no longer be changed directly once the programme
has started. If nevertheless there is an attempt to change the programme on
the programme knob, the programme progress display and the mainte-
nance indicators flash. If an option button (excluding the AUDIBLE SIGNAL
(SIGNAL) button) is pressed,
Err
appears in the multidisplay. The drying
programme is not however affected by this (laundry protection).
Putting in extra items or taking items out before end of
programme
1.
Open door.
1
Warning!
Laundry and drum can become hot. Risk of burns!
2.
Load or remove laundry items.
3.
Close door securely.
4.
Press the START/PAUSE button to continue the drying cycle.
Drying cycle complete / removing laundry
Once the drying cycle is complete, the END (ENDE) and CREASE GUARD
(KNITTERSCHUTZ) displays light up. If the AUDIBLE SIGNAL (SIGNAL) but-
ton has been pressed, an audible signal sounds intermittently.
3
The drying cycle is automatically followed by a crease guard phase which
lasts around 30 minutes. The drum rotates in intervals during this phase.
The laundry thereby remains relaxed and free of creases. The laundry can
be removed at any time during the crease guard phase. (The laundry should
be taken out towards the end of the crease guard phase at the latest to pre-
vent creases from forming.)
1.
Open loading door
2.
Before removing the laundry, remove lint from the micro-fine filter. It is
best to use a damp hand for this purpose (refer to “Cleaning and mainte-
nance” section).