23
Door Reversal Instructions
The door opening direction can be changed if
required.
1
Warning!
Before reversing the door, isolate
the appliance from the mains supply.
Proceed as follows to reverse the door opening direc-
tion:
1.
Un-screw the screws A on the front panel of the
appliance.
2.
Take-off the door by displacing it horizontally.
3.
Un-screw the screws B on the inside of the door
and take-off the hinges C.
4.
Unscrew and take-off the locking block D.
5.
Release the coverplates E, F and G with a thin
screwdriver by pressing on the latching device,
displace them to the side. Take them out and
insert them again on the opposite side.
6.
Screw-on the hinges C and the locking block D on
the opposite side of the door.
7.
Screw-off the door catch H and remove it.
8.
Take-out the latched catch covering J.
9.
Insert the door catch H and the catch covering J
on the respective opposite side into the break-out
and screw-down or latch into position.
10.
Push the door with the hinges into the breakouts
provided for them in the front panel of the appli-
ance and firmly attach it with the screws.
1
Warning!
The appliance is safe again for
operation only when all plastic parts have
been mounted.
F
A C B
E
D
E
F
H
A C B
G
J
G
J
