22
If you do not find the required information in this man-
ual to remedy a disturbance, please call the customer
service.
Replace the interior light
1.
A replacement bulb can be purchased through
your local Electrolux Service Force Centre (Part
No: 647072580).
1
Warning!
Never use standard light bulbs in
your dryer.
2.
Isolate the appliance from the mains supply.
3.
Screw-off the bulb cover. (The bulb is located at
the top behind the door; see
Front view
).
4.
Replace the defective bulb.
5.
Screw-on the bulb cover.
1
Warning!
For safety reasons the bulb cover
must be screwed-on. The dryer must not be
operated, without the cover in place.
The drying process takes unusually
long. 4.5 hours after the beginning
of the drying process:
- END (ENDE) display is illuminated
- acoustic signal sounds
- discontinuation of the drying
process
-
program run display is flashing
SPECIAL CARE (SCHON) button
pressed and too much laundry
filled-in
Check the program selection:
SPECIAL CARE (SCHON) button
appropriate only for laundry
amounts up to 2.5kg
Too much laundry filled-in
Reduce the amount of laundry
filled-in
Laundry too damp
Pre-dry the laundry more thor-
oughly
Symptom
Possible cause
Solution
