background image

7

ENGLISH

Use

The control panel

1

2

3 4 5 6 7 8 9 10

90

 min

60

 min

30

 min

6

kg

TIMELINE

START/PAUSE

EDC

 

5330

PROGRAM

FUNCTION

1 Water reservoir

Inside you will find the programme chart that
allowsyou to choose the correct drying programme.

2 Programme/Time selector dial

Note!

With the instruction booklet you will also findstickers
for programme selector dial. Choose thesticker in
the desired language (Italian, Portuguese,Greek and
Turkish). 

Clean the control panel with a dry cloth to
eliminateduster residue.Remove the back of the
sticker and place it aroundthe programme selector
dial as shown in the photo.

The programme/time selector dial allows you
toselect electronically controlled or time
controlleddrying.Turn the dial to the required
programme or time.

Electronically controlled drying
(automatic)

The appliance runs these programmes with the help
of probes which detect the degree of dampness of
the laundry.
Simply select the programme according to the type
of laundry and degree of drying required.

Time controlled drying

Can be used to finish off drying if necessary.
Select the 90 or 60 minute programme for cottons
or the 30 minute programme for synthetics.

To cancel a programme which is running, turn the
programme selector dial to “

0

”.

At the end of drying, turn the selector dial to “

0

” to

switch the machine off before removing the laundry.

3 DOOR RELEASE button 

Press this button to open the door. The light above
the button will light up.

Opening the door by means of this button is
possible only if the tumble dryer is on
(programme selector dial set to a programme or
drying time).

If you open the door during a programme, in order
to restart the programme you must re-press the
“START/PAUSE” 

button again after having

closed the door.

4 NO BUZZER button

A buzzer sounds

• when selecting the programme

• when depressing the buttons

• when an incorrect option selection is made

• when the programme selector dial is turned to

another position during the programme or when
you depress an option button during the cycle

• at the end of the programme

• when the water reservoir is full

• if the machine is not working correctly

• when the small door at the bottom is open

By depressing button “Buzzer OFF” 

the acoustic

signal is switched off

.

The corresponding light comes on.

P11

9

6

125992575 gb-f-p.qxp  2005-07-13  10:12  Page 7

Summary of Contents for EDC 5330

















Reviews: