8
5 QUICK DRY button
By depressing this button the drying time is reduced
in the following COTTON programmes:
• extra dry
• ready to wear
• store dry
The corresponding light illuminates. This option
cannot
be selected together with “low temperature”
function
.
6 LOW TEMPERATURE button
Pressing this button allows drying to be performed
at a lower temperature, for delicate items.
The corresponding pilot light comes on.
This option can also be used for time controlled drying.
This function
cannot
be used with “Quick drying”
.
7 DELAY START button
This button allows you to delay the starting of the
programme by 12 hours max.
This option must be selected
after
having selected
the programme and
before
pressing “START/PAUSE”
to start the programme.
Every time the button is pressed, the time is
increased by 30 minutes, until the display shows a
delay of “2 hours”. After this, the delay is displayed
hour by hour.
The minutes or hours of delay that have been
selected are displayed for 3 seconds, then the
display shows the duration of the previously
selected programme.
The countdown begins after you have pressed the
“START/PAUSE”
button.
To cancel the delay time press first the
“START/PAUSE”
button and then the “DELAY
START”
button until the display indicates
0’
. Then
press the “START/PAUSE”
button again.
When the delay is cancelled, after 3 seconds the
display shows the duration of the programme.
During the delayed start, it is not possible to change
the programme or the delay time that have been
selected. To do this, you must first switch off the
machine by setting the programme selector dial to
“0”. Select the new programme, the options and the
delayed start, then press the “START/PAUSE”
button.
To cancel or change options that have been
selected, simply set the appliance to PAUSE. Once
you perform the desired operation, press once again
the “START/PAUSE”
button.
If you wish to add more laundry while the machine is
performing the countdown, simply open the door.
When you close the door, press the “START/PAUSE”
button again to cause the countdown to be
resumed.
8 DISPLAY
The display shows the following information:
• duration of selected programme
• delayed start
• end of programme
• incorrect option selection
• alarm code
•
Duration of selected programme
After you have selected the programme, its
duration (in hours and minutes) appears on the
display. It is calculated automatically on the basis
of the maximum load accepted for each type of
fabric and of the required degree of drying.
When the programme starts, the remaining time is
displayed every 5 minutes.
•
Delayed start
If you have selected a delay time by means of the
relevant button, the display shows it for 3
seconds; then it shows the duration of the
previously selected programme.
The countdown is displayed every 30 minutes until it
displays “90 minutes” and then hour by hour.
•
End of programme
A
flashing zero
indicates the end of the
programme and it is displayed after the “anti-
creasing” phase.
3
1.2
0
125992575 gb-f-p.qxp 2005-07-13 10:12 Page 8
Summary of Contents for EDC 5330
Page 16: ......
