Electrolux EBGL3X, User Manual

Page: 9 / 32

5.3 Electronic programmer
hr min
1 2 3
4 5 6
1
Function indicators
2
Time display
3
Function indicator
4
Button +
5
Selection button
6
Button -
If you do not use the appliance for
3 minutes, the brightness of the
display decreases to lower the
power consumption. When you
press a button, the display goes
back to the active mode.
6. CLOCK FUNCTIONS
Clock function Application
Duration To set how long the appliance must operate.
End To set when the appliance must be deactivated.
Minute Minder To set a countdown time. An acoustic signal sounds af-
ter the time period is completed.
This function has no
effect on the operation of the appliance.
Time of day To set, change or check the time of day.
You can use Duration and End
at the same time to set the
time when the appliance must be
activated and then deactivated.
First set Duration
, then End
.
6.1 Setting the clock functions
1. For Duration and End , set an
oven function and temperature. This
is not necessary for the Minute Mind-
er
.
2. Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
3. Press + or - to set the time for the
necessary clock function.
The display shows the indicator for
the clock function you set. When the
set time ends, the indicator flashes
and an acoustic signal sounds for two
minutes.
With the Duration and End
functions, the appliance deacti-
vates automatically.
4. Press a button to stop the signal.
5. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
ENGLISH 9