• If you have nonstick accessories, do not
clean them using an aggressive agents,
sharp edged objects or dishwasher. It can
destroy nonstick coating!
Shelf support rails
You can remove the shelf support rails to
clean the side walls.
Removing the shelf support rails
1. Carefully pull the rail up and out of the
front catch.
2. Lightly move the rail on the front catch in-
wards.
3. Pull the rail out of the rear catch.
Installing the shelf support rails
Install the shelf support rails in the opposite
sequence.
Steam generation system
Caution!
Dry the steam generator after
each use. Soak up water with a sponge.
Remove a lime residue with water and
vinegar.
Caution!
Chemical de-scaling agents
can damage oven enamel. Obey
instructions of the manufacturer!
Water drawer and steam generator
1. Fill the water and vinegar mixture (ap-
proximately 250 ml) through the water
drawer in the steam generator.
Let to operate for approximately 10 mi-
nutes.
2. Remove the water and vinegar with a soft
sponge.
3. Use clean water (100-200 ml) to flush the
steam generation system through the
water drawer.
4. Remove water from the steam generator
with the sponge and rub dry.
5. Keep the door open to let the oven dry
fully.
Replacing the oven lamp (left side of the
appliance)
Cleaning the glass cover
1. Remove the left shelf support rail.
2. Use a cross-tip screwdriver to remove
the glass cover.
3. Take off the metal frame and seal and
clean.
4. If necessary: Replace the oven lamp.
Technical data: 25 Watt, 230/240 V -
E14.
5. Install metal frame and seal and tighten
screws.
6. Install the left shelf support rail.
Oven door
Remove the door to clean the inner side of
the appliance more easily.
Removing the oven door
1. Open the door as far possible.
3
4
2
2. Fully release the clamping levers on the
hinges.
3. Take hold of the oven door on the sides
with both hands and close it about 3/4 of
14
electrolux