Electrolux E5HB1-51GG, Instruction Manual

Page: 9 / 20

9 www.electrolux.com www.electrolux.com
• Do not use the appliance continuously for more than 30 seconds when processing heavy load. Do not
use the appliance continuously for more than 60 seconds in normal use. Allow the appliance to cool
down before restarting.
• The appliance cannot be used for chopping ice or blending hard and dry substances, such as nuts or
candy; except with specific accessories provided with the appliance, otherwise the blade could be
blunt.
• Do not use this appliance to stir paint. Danger, could result in an explosion!
• Do not let the power cord come into contact with hot surfaces or hang over the edge of a table or
counter.
• Never use accessories or parts made by other manufacturers not recommended or sold by Electrolux
as it may cause a risk of injury to persons.
• This appliance is for indoor use only.
• This appliance is intended for domestic use only. Electrolux will not accept any liability for possible
damage caused by improper or incorrect use.
BEFORE FIRST USE
1
Before using your appliance, remove all packing material, plastic, labels, stickers or tags that may be
attached to the motor base, bowls or attachments. Clean the product before using it for the first time. (Please
refer to “CLEANING AND CARE“ section for cleaning instructions.
USING THE MIXING FOOT
2
Insert the mixing foot to handheld part, turn the handheld part clockwise and lock into position.
3 Insert the stick mixer deep into the beaker, plug in to mains outlet and press ON/OFF button or TURBO but-
ton to start. Make sure the beaker is no more than 2/3 full. If you do not use the beaker, do not immerse the mix-
ing foot more than 2/3 of its length. Move stick mixer lightly up and down to ensure best processing of content.
4 Adjust the normal speed, by moving the speed selector left (for a lower speed) or right (for a higher speed).
Release the ON/OFF or TURBO button to stop mixing. When processing normal load, the appliance can be used
continuously for 60 seconds. Allow the appliance to cool for 1 minute before restarting. To disassemble, turn the
handheld part anti-clockwise.
CAUTION! Allow the mixing foot to cool down after processing hot ingredients or liquid.
USING THE CHOPPER*
5
Place the chopper bowl on a clean, level surface. Put the chopper blade into the shaft at the base of the chop-
per bowl.
6
Place food into the chopper bowl. Amount of food to be chopped cannot exceed the maximum amount as
indicated on the chopper bowl. Close the chopper bowl lid.
7
Insert the handheld part into the chopper bowl lid and turn clockwise (A) to lock into position. Plug into pow-
er outlet and press ON/OFF button or TURBO button to start. Release to stop. To disassemble, turn the handheld
part anti-clockwise.
USING THE WHISK*
8
Attach the whisk to the whisk holder and then assemble the whisk assembly with the handheld part. Turn the
handheld part clockwise to lock in position. Plug into power outlet and press ON/OFF button or TURBO button
to start. Release to stop. To disassemble, turn the handheld part anti-clockwise.
USING THE POTATO MASHER*
9
Insert the masher blades into the potato masher. Attach the potato masher to the handheld part, and turn
clockwise until locked into position. Plug into power outlet and press ON/OFF button or TURBO button to start.
Release to stop. To disassemble, turn the handheld part anti-clockwise.