36
Electronic Control Settings
USER PREFERENCES
To browse through the User Preferences menu:
1.
Press
USER PREF
to bring up the User Preferences menu.
2.
Press
USER PREF
again to browse through the menu pages.
3.
Press
+
hi
or
-
lo
to toggle between the available options.
4.
Press
START
while the chosen option is on display to change.
5.
Press
CANCEL
when finished to get back to the standard oven display.
SETTING THE CLOCK - TIME OF DAY
The clock may be set for 12 or 24 hour time of day operation (see advanced settings section).
The clock has been preset at the factory for the 12 hour operation. When the range is first
plugged in, or when the power supply to the range has been interrupted, the display will show
"CLO 12:00"
. The clock must be set before the oven can be used.
When power to the unit has been interrupted, “
12:00
” appears and flashes in the display. To
set the Clock in this case, skip step 1 in the example below and follow steps 2 and 3.
To set the clock (example for 1:30):
1.
Press
USER PREF
until you get to the
CLO 12:00
menu page.
2.
Press
1 3 0
pads to set the time of day to 1:30. The pads
+
hi
or
-
lo
can also be pressed
to raise or lower the actual time displayed.
3.
Press
START
to accept the changes and go back to user preferences menu display.
User Preferences menu items:
•
CLO 12:00
; Setting the clock.
•
CLO on
; Clock on/off.
•
CLO 12hr
; 12/24 hour time of day display.
•
UPO
; Adjusting oven temperature.
The User Preferences menu includes all user defined options. This feature enables you to
control the various options of the electronic controls. This menu features the Time of Day,
Celsius or Fahrenheit display mode, Continuous Bake or 12 Hour Energy Saving modes,
Clock display or No-Clock display, 12 Hours Time of Day or 24 Hours Time of Day, Audio
Control, and Adjusting the oven temperature. The User Preferences menu is only available
when the oven is not being used (not cooking).
•
F-C F
; Fahrenheit / Celcius display.
•
AUd
; Audio on/off and volume.
•
E S on
; 12 hour Energy Saving on/off.
•
rSt
; Reset to default factory settings.
