Electrolux COE7P31B, User Manual

Page: 17 / 36

The display shows flashing and the
default set core temperature. The
temperature is 60 °C for the first operation,
and the last set value for each subsequent
operation.
4. Touch or to set the core
temperature.
5. Touch or the settings save
automatically after 5 seconds.
You can set the core
temperature only when
flashes. If
is in the
display but does not flash
before you set the core
temperature, touch and
or to set a new value.
6. Set the oven function and the oven
temperature.
The display shows the current core
temperature and the heat up symbol
.
When you cook with the core
temperature sensor, you can
change the temperature shown
in the display. After you put the
core temperature sensor in the
socket and set an oven function
and temperature, the display
shows the current core
temperature.
Touch again and again to see
three other temperatures:
• the set core temperature
• the current oven
temperature
• the current core
temperature.
When the dish is at the set core temperature,
an acoustic signal sounds for 2 minutes and
the value of the core temperature and
flash. The appliance deactivates.
7. Touch a sensor field to deactivate the
acoustic signal.
8. Remove the core temperature sensor
from the socket and remove the dish
from the appliance.
WARNING!
There is a risk of burns as the
core temperature sensor
becomes hot. Be careful when
you unplug it and remove it from
the dish.
Food category: casserole
1. Activate the appliance.
2. Place half of the ingredients in a baking
dish.
3. Insert the tip of the core temperature
sensor exactly in the centre of the
casserole. The core temperature sensor
should be stabilized in one place during
baking. Use a solid ingredient to achieve
that. Use the rim of the baking dish to
support the silicone handle of the core
temperature sensor. The tip of the core
temperature sensor should not touch the
ENGLISH 17