background image

17

Chimney Stack

The chimney consists of two sections. 
The lower chimney measures 700mm and the upper 
chimney (with the recirculation grilles on either side) 
measures 415mm. The overall installed measurement 
is min. 810 - max 1050mm.
 

Fitting the Chimney

•  Position the upper chimney section and 

fi

 x the upper 

part to the frame using the 2 screws 

12c

 (2,9 x 9,5) 

provided.

•  Similarly, position the lower chimney section and 

fi

 x 

the lower part to the frame using the 2 screws 

12c

 

(2,9 x 9,5) provided.

Fitting the Hood Body

• Before 

fi

 xing the hood body to the frame:

•  Remove the grease 

fi

 lters from the hood body.

•  Remove any activated charcoal 

fi

 lters.

•  From below, use the 4 screws 

12f

 (M6 x 10)

 

Electrical Connection

•  Being sure that the connector of the feeding cable 

is correctly inserted in the socket placed on the side 
of the fan.

•  Connect the control connector 

Cmd

.

•  Connect the lights connector 

Lux

.

•  Place the connectors in the junction box 

24

 and close 

it using the two screws 

12e

 (2,9 x 9,5) provided.

•  Fix the junction box to the hood body using the two 

screws 

12c

 (2,9 x 6,5) provided.

•  For the recirculation version, 

fi

 t the activated carbon 

odour 

fi

 lter.

•  Replace the grease 

fi

 lters.

 

INSTALLING THE COOKER HOOD

12f

12c

12c

24

12e

Cmd

12c

Lux

Summary of Contents for CHI 950





















Reviews: