15
AOFP061U, AOFP101U and AOFP102U models:
the
condensation drain tray holder guides are fitted externally on the
bottom of the appliance. Take the bowl from inside the chamber
and slide it on to the holder guides.
AOFP201RU
model
does not have condensation drain tray.
B.1.3.2 Positioning the spacers
AOFP061U, AOFP101U and AOFP102U models:
fitting the
spacers. The spacers must be positioned on the back of the
cabinet (see figures here below):
A
A
and screwed on with eight M5 x 12 screws, screwing them into
the mounting holes. The spacers have the function of keeping
the appliance a certain distance from the wall to allow the
refrigerating unit elements to cool properly.
Failure to install the
spaces will void warranty and any responsibility of the
manufacturer.
B.1.3.3 Positioning of the “Cook&Chill” stacked units
If the
AOFP061U
blast freezer will be used to make a new a
“Cook&Chill” unit, please follow the instructions below, making
reference to the steps illustrated:
- take the
6 GN 1/1
oven and remove its leveling feet (see picture
"A")
- take the 4 spacer panels and fit them to the mounting holes on
the bottom of the oven (see picture "B")
3
4
5
A = spacers
B
A
